Image shown is for reference only. Actual package may vary. Refer to the product data sheet for package details.
SOT363.png26V, Zero-Drift, Bidirectional, High-Precision Current Monitor
Contact Sales
Log in or register to manage email notifications about changes to datasheets or PCNs for this part.
The ZXCT199Q series are automotive AEC-Q qualified current shunt monitors which are designed to deal with very low sense voltages, enabling the use of very low value sense resistors to monitor large currents. The low offset voltage and zero drift architecture enables current sensing with maximum drops across the shunt to as low as 10mV full-scale.
The ZXCT199Q series have three fixed voltage gain options in 50V/V, 100V/V, and 200V/V. They can measure voltage across shunts at common-mode voltages from -0.1V to 26V, independent of supply voltage.
OUT pin is a voltage proportional to the load current. It can then be processed with an ADC. These devices are designed with zero-drift architecture and manufactured by post trim technology to achieve low offset voltage, low gain drift and low gain error over full temperature range for precise measurement.
These devices operate from a 2.7V to 26V power supply with a maximum supply current of 100μA. All versions have a temperature range of -40°C to +125°C, and are offered in the SOT363 package.
The ZXCT199Q has been qualified to AEC-Q100 Grade 1 and is automotive grade supporting PPAPs.
The ZXCT199Q is well suited for power supplies running at large current flow requiring the use of low-value sense resistors.
| Compliance (Only Automotive supports PPAP) | Automotive |
|---|---|
| AEC Qualified | Yes |
| Type | Voltage output |
| Minimum S+ Common-Mode Sense Voltage (V) | -0.1 |
| Maximum S+ Common-Mode Sense Voltage (V) | 26 |
| Minimum VCC/VB Supply Voltage (V) | 2.7 |
| Maximum VCC/VB Supply Voltage (V) | 26 |
| Maximum Output Voltage (V) | (V+) + 0.3 |
| Voltage output Gain VOUT/VSENSE (V/V) | 50, 100, 200 |
| % Accuracy @ VSENSE =100mV Ta (%) | 0.8 |
| Quiescent Current (µA) | 65 |
| Bandwidth typ (MHz) | 0.014 to 0.07 |
| Operating Ambient Temperature Range (°C) | -40 to 125 |
| Special Features | Bi-directional current measurement, low input offset voltage |
Diodes Incorporated's current monitors are high-performance, high-side/power rail current measurement ICs. They greatly simplify the measurement of load currents without disturbing the ground plane/reference point.
The current monitor families contain variants with quiescent currents as low as 3µA, and others with operating voltages up to 60V, proving solutions for overcurrent detection in consumer, industrial, and automotive applications. The portfolio includes current output variants which via an external resistor to ground to provide adjustable gain, and voltage output variants with fixed gains.
Automotive-compliant variants are available which are qualified to AEC-Q100 Grade 1 in IATF 16949 facilities supporting PPAP documentation.
