Image shown is for reference only. Actual package may vary. Refer to the product data sheet for package details.

3D-MSOP-8.png

Image shown is for reference only. Actual package may vary. Refer to the product data sheet for package details.

SO-8.png

TSSOP-8.png

Back to Comparators

LM2903A

DUAL DIFFERENTIAL COMPARATORS

Contact Sales

Description

The LM2901/2903 series comparators consist of four and two independent precision voltage comparators with very low input offset voltage specification. They have been designed to operate from a single power supply over a wide range of voltages; however operation from split power supplies is also possible. They offer low power supply current independent of the magnitude of the power supply voltage.

The LM2901/2903 series comparators are designed to directly interface with TTL and CMOS. When operate from both plus and minus power supplies, the LM2901/2903 series comparators will directly interface with MOS logic where their low power drain is a distinct advantage over standard comparators.

The dual devices are available in SO-8 and the quad devices available in SO-14 and TSSOP-14 with industry standard pinouts.

Both use green mold compound as standard.

Feature(s)

Wide power supply range:
Single supply: 2V to 36V
Dual supplies: ±1.0V to ±18V
Very low supply current drain– independent of supply voltage
- LM2903: 0.6mA
- LM2901: 0.9mA
Low input bias current: 25nA
Low input offset current: ±5nA
Typical offset voltage:
- Non-A device: 2mV
- A device: 1mV
Common-mode input voltage range includes ground
Differential input voltage range equal to the power supply voltage
Low output saturation voltage:
- LM2903: 200mV at 4mA
- LM2901: 100mV at 4mA
Output voltage compatible with TTL, MOS and CMOS
Totally Lead-Free & Fully RoHS Compliant
Halogen and Antimony Free. “Green” Device

Application(s)

Embedded System
Precision Power Supplies
Industrial Control

Product Specifications

Product Parameters

Compliance (Only Automotive supports PPAP)	Standard
AEC Qualified	No
Minimum Supply Voltage (V)	2 V
Maximum Supply Voltage (V)	- V
Supply Current @ 5V (per Op Amp) (mA)	0.6 mA
Input Offset Voltage (Typ/Max)	- mV
Input Bias Current typ (nA)	25 nA
Minimum Input Common Mode Voltage (V)	0 V
Maximum Input Common Mode Voltage (V)	VCC -1.5 V
Output Current Sink (mA)	16 mA
Number of Channels	2
Operating Ambient Temperature Range (°C)	-40 to 125 °C
Output Type	Open Collector

Technical Documents

Recommended Soldering Techniques

TN1.pdf

Product Change Notices (PCNs)

A PCN may only apply to specific orderable part numbers in this datasheet. Please refer to the corresponding PCN to see the exact orderable part number(s) affected.

PCN #	Issue Date	Implementation Date	Subject
PCN-2548	2021-10-08	2022-01-08	Additional Wafer Source (JKFAB), New Bill of Materials (BOM) with PdCu Bond Wire, and Assembly/Test (A/T) Site (CAT)
PCN-2527	2021-06-09	2021-09-09	Additional Wafer Source (GFAB, JKFAB), New Bill of Materials (BOM) with PdCu Bond Wire, and Additional Assembly/Test (A/T) Site (CAT)
PCN-2512	2021-04-16	2021-07-16	Qualified Additional Assembly & Test (A/T) Site