Diodes Incorporated — Analog and discrete power solutions
W QFN4040 24 Type A1

Image shown is for reference only. Actual package may vary. Refer to the product data sheet for package details.

W-QFN4040-24.png
Back to USB Type-C and USB Power Delivery IC

AP33772S

I2C Interface USB PD3.1 EPR Sink Controller

Contact Sales

Log in or register to manage email notifications about changes to datasheets or PCNs for this part.

Description

The AP33772S is a highly integrated USB Type-C ® PD3.1 sink controller to support Extended Power Range (EPR) / Adjustable Voltage Supply (AVS) up to 28V and Standard Power Range (SPR) / Programmable Power Supply (PPS) up to 21V. The device is targeted for DC power request and control for flexible Type-C Connector-equipped Devices (TCDs) with an embedded host MCU (Micro Controller Unit) and I2C interface pins (SCL, SDA).

Through the I2C interface interaction and interrupt mechanism, the host MCU sets up proper desired power profile (programmable voltage and current) with relevant threshold (OTP, OCP, etc.) and delegates PD negotiation tasks to the AP33772S. The host MCU further inquiries about status of various I2C registers for intended applications.

Based on high-voltage process, the AP33772S offers short protection between CC1/CC2 pins to adjacent high-voltage pin up to 34V. Smart built-in firmware of the AP33772S offers comprehensive safety protection scheme, including overvoltage protection (OVP), undervoltage protection (UVP), overcurrent protection (OCP), over temperature protection (OTP) and moisture detection of the Type-C connector. In addition, external OTP and thermal de-rating are supported by a NTC resistor.

Meanwhile, the AP33772S provides a LED pin to indicate the different PD power negotiation results, and a FLIP pin to show the cable plugin orientation.

Feature(s)

  • USB PD3.1 v1.6 Certified with TID: 10062
  • Operating Voltage Range of VCC: 3V to 31V
  • Support PD3.1 EPR/AVS Up to 28V and SPR/PPS Up to 21V
  • Support OVP with Hard Reset and Auto Restart
  • Support UVP, OCP and OTP with Output Latch Off
  • Support OTP and Thermal De-Rating through NTC Resistor
  • Support OTP through Internal Junction Temperature Detection
  • VBUS Short Protection on CC1/CC2 Pins Up to 34V
  • I2C Commands for External MCU Monitoring, Control and Parameter Programming
  • Dedicated Pins for CC Flip Indication and Interrupt Request
  • Support Moisture Detection of the Type-C Connector
  • LED Indication for Different Negotiation Results
  • Driver for Output Enable N-MOS Switch
  • Support Dead Battery Function
  • Support Legacy Type-A Charger with Type-A to Type-C Cable
  • Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
  • Halogen and Antimony Free. “Green” Device (Note 3)
  • For automotive applications requiring specific change control (i.e. parts qualified to AEC-Q100/101/104/200, PPAP capable, and manufactured in IATF 16949 certified facilities), please contact us or your local Diodes representative. https://www.diodes.com/quality/product-definitions/

Application(s)

  • USB Type-C connector-equipped battery-powered devices
  • USB Type-C connector-equipped DC-power input devices
  • USB PD3.1 testers

Product Specifications

Product Parameters

Compliance (Only Automotive(Q) supports PPAP) Standard
Protocols Supported USB PD3.1 EPR (MCU + OTP + Hardwired)
Power Role UFP (Upstream-Facing Port) Sink
I2C Support Yes
SR Controller Embedded No
VBUS MOS Embedded No
VCC Maximum Rating 34
VCC UVLO (V) 2.7

Technical Documents

Evaluation Boards and User Guides

Others

Recommended Soldering Techniques

TN1.pdf