Image shown is for reference only. Actual package may vary. Refer to the product data sheet for package details.

U-QFN4040-16-SWP.png

Back to DC-DC Buck Converters - Automotive

AP66200Q

3.8V to 60V Input Automotive Grade, 2A Low IQ Synchronous Buck Converter

Evaluation Boards and User Guides

AP66200QFVBW-EVM.pdf (452 KB)

Evaluation Board User Guides

DDB103R3-User-Guide.pdf (512 KB)

Contact Sales

Description

The DIODES™ AP66200Q is an adjustable switching frequency, internally compensated, synchronous DC-DC buck converter with a default internal frequency of 500kHz. The device fully integrates a 185mΩ high-side power MOSFET and an 80mΩ low-side power MOSFET to provide highly efficient step-down DC-DC conversion.

The AP66200Q enables a continuous load current of up to 2A with as high as 95% efficiency. The device features current mode control operation, enabling easy loop stabilization, and supports a wide range of output capacitive loads.

With its high level of integration and minimal need for external components, the AP66200Q simplifies board layout and reduces space requirements. This makes it ideal for distributed power architectures.

The AP66200Q is available in the standard Green U-QFN4040- 16/SWP (Type UXB) package.

Feature(s)

Qualified for Automotive Applications
AEC-Q100 Qualified with the Following Results
- Device Temperature Grade 1: -40°C to +125°C T_A
- Device HBM ESD Classification Level H1C
- Device CDM ESD Classification Level C3B
V_IN8V to 60V
2A Continuous Output Current
V_OUT Adjustable from 0.8V to 50V
Enhanced Efficiency Mode with Bias
Adjustable Switching Frequency. 500kHz Default Frequency
Start-Up with Pre-Biased Output
External Soft-Start with Tracking – Sequential, Ratiometric, or
Default Internal Soft-Start of 1.7ms
Enable Pin with 5% tolerance
Soft Discharge
±5% Power Good Detection with Internal Pull-Up Resistor
Overcurrent Protection (OCP) with Hiccup
Thermal Protection
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
The AP66200Q is suitable for automotive applications requiring specific change control; this part is AEC-Q100 qualified, PPAP capable, and manufactured in IATF 16949 certified facilities. https://www.diodes.com/quality/product-definitions/

Application(s)

General-purpose point-of-load DC/DC power conversion
Automotive infotainments
Telecommunication systems
Distributed power systems
Home audio devices
Consumer electronics
Network systems
FPGA, DSP, and ASIC supplies
Green electronics

Product Specifications

Product Parameters

Compliance(Only Automotive supports PPAP)	Automotive
Type	Buck
Minimum Input Voltage (V)	3.8
Maximum Input Voltage (V)	60
Output Current (A)	2
Minimum Output Voltage (V)	0.8
Maximum Output Voltage (V)	50
Quiescent Current Typ (µA)	50
Shutdown Current Typ (µA)	1.5
Frequency Typ (kHz)	300/500/2500
HS RDS(ON) (mΩ)	120
LS RDS(ON) (mΩ)	55
Features	Enhanced Efficiency Mode with Bias, Adjustable Switching Frequency. 500kHz Default Frequency, Start-up with Pre-biased Output, External Soft-Start with Tracking – Sequential, Ratiometric, or Absolute, Default Internal Soft-Start of 1.7ms, Enable Pin with 5