Diodes Incorporated — Analog and discrete power solutions
Back to UART

PI7C9X798

16C550 Octal UART Bridge Controller

Contact Sales

Log in or register to manage email notifications about changes to datasheets or PCNs for this part.

Overview

Description

The PI7C9X798 (798), is a 1.62V to 3.6V octal Universal Asynchronous Receiver and Transmitter (UART) with 5V tolerant serial (modem) inputs. The highly integrated device is designed for high bandwidth requirement in communication systems. The global interrupt source register provides a complete interrupt status indication for all 8 channels to speed up interrupt parsing. Each UART has its own 16C550 compatible set of configuration registers, TX and RX FIFOs of 64 bytes, fully programmable transmit and receive FIFO trigger levels, TX and RX FIFO level counters, automatic RTS/CTS or DTR/DSR hardware flow control with programmable hysteresis, automatic software (Xon/Xoff) flow control, RS-485 half-duplex direction control, and auto address detection, Intel or Motorola bus interface and sleep mode with a wake-up indicator.

Features

  • 1.62V to 3.6V with 5V Tolerant Serial Inputs
  • Single Interrupt output for all 8 UARTs
  • A Global Interrupt Source Register for all 8 UARTs
  • 5G “Flat” UART Registers for easier programming
  • Simultaneous Initialization of all UART channels
  • A General Purpose Command-driven 16-bit Timer/counter
  • Sleep Mode with Wake-up Indication
  • Highly Integrated Device for Space Saving
  • Each UART is independently controlled with:

      - 16C550 Compatible 5G Register Set
      - 64-byte Transmit and Receive FIFOs
      - Transmit and Receive FIFO Level Counters
      - Programmable TX and RX FIFO Trigger Level
      - Automatic RTS/CTS or DTR/DSR Flow Control
      - Automatic Xon/Xoff Software Flow Control
      - RS485 HDX Control Output
      - RS485 auto address detection
      - Infrared (IrDA 1.0/1.1) Data Encoder/Decoder
      - Programmable Data Rate with Prescaler

  • Up to 8 Mbps Serial Data Rate with 64MHz external clock input
  • Crystal oscillator(up to 24MHz) or external clock(up to 80MHz) input
  • Built in Power-On-Reset circuit

Applications

  • Remote Access Servers
  • Ethernet Network to Serial Ports
  • Network Management
  • Factory Automation and Process Control
  • Point-of-Sale Systems
  • Multi-port RS-232/RS-422/RS-485 Cards

Specifications & Technical Documents

Product Parameters

Ports

8 UART

Pins

100

Data Rate (kbps)

20Mbps

Bytes

64

Tx/Rx FIFO Ctrs

Yes

Tx/Rx FIFO INT Trig

Yes

Auto RTS/CTS

Yes

Interface

8-Bits

Ambient or Junction Temperature (°C)

-40 to 85

Technical Documents

Recommended Soldering Techniques

TN1.pdf

Additional Technical Documents are available upon request:
Application information, Evaluation board, and Other technical documents

Request Documents

Purchase & Availability

Something went wrong with your request. Please try again later. If this problem continues, please contact Diodes support for assistance.

Product Change Notices (PCNs)

A PCN may only apply to specific orderable part numbers in this datasheet. Please refer to the corresponding PCN to see the exact orderable part number(s) affected.

PCN # Issue Date Implementation Date Subject
PCN-2770 2025-10-30 2025-10-30 Add Fab Site Code, Country of Diffusion (COD) and Assembly Site Origin (ASO) on Product and Shipping Labels for all Diodes Products