PI3A27518

Description

The PI3A27518 is a 6-channel, 1:2 multiplexer/demultiplexer. The COMx port can be configured to connect with NOx or NCx ports in 4 different modes (refer to Truth Table for details). The PI3A27518 has a wide operating voltage range, very low power consumption and small packaging. The device can be used as an analog switch or as a low-delay bus switch. The PI3A27518 supports a wide operating power supply voltage, 1.65V to 3.6V and has an On-Resistance of 5Ω at +3.3V. Break-before-make switching prevents both switches from being enabled simultaneously. This eliminates signal disruption during switching.

Feature(s)

• CMOS Technology for bus and analog applications
• Low propagation delay
• Low typical On-Resistance: 5Ω
• Signal passing bandwidth, 380 MHz
• Wide VDD range: 1.65V to 3.6V
• Rail-to-Rail signal range
• High Off Isolation: -66dB @ 10MHz
• Crosstalk Rejection reduces signal distortion:
  -60dB @ 10MHz
• Break-Before-Make Switching
• Extended Industrial Temperature Range:
  -40°C to 85°C
• ESD protection : 2.5kV(HBM)
• Totally Lead-Free & Fully RoHS Compliant 
• Halogen and Antimony Free. “Green” Device 
• For automotive applications requiring specific change
  control (i.e. parts qualified to AEC-Q100/101/200, PPAP
  capable, and manufactured in IATF 16949 certified
  facilities), please contact us or your local Diodes
  representative. https://www.diodes.com/quality/product-definitions/
• Packaging (Pb-free & Green):
• 24-pin TQFN (ZD), 4mm x 4mm

Application(s)

• SD-SDIO and MMC Two-Port MUX
• qSPI Two-Port MUX
• Audio and Video Signal Routing